MicroMist - the low uptake nebulizer for all ICPs

The MicroMist micro-uptake glass concentric nebulizer offers high performance for limited sample volumes. It makes routine ICP-MS Hg determinations possible and reduces matrix effects when used with Glass Expansion's Cinnabar spray chamber.

• Material: Borosilicate glass
• High physical reproducibility ~ 1%
• TDS tolerance, typically up to 15%
• Low RSDs due to highly accurate construction
• Standard available uptake: 0.05, 0.1, 0.2, 0.4 &0.6mL/min

MicroMist U-Series nebulizers with sample uptake 0.2 - 0.6mL/min are supplied with:
1 x NFT-050, UniFit connector (sample tube 0.50 ID x 1.3mm OD x 700mm long)

MicroMist U-Series nebulizers with sample uptake 0.05 - 0.10mL/min are supplied with:
1 x NFT-025, UniFit connector (sample tube 0.25mm ID x 1.3mm OD x 700mm long)

MicroMist EzyFit nebulizers with sample uptake 0.2 - 0.6mL/min are fitted with:
1 x EZT-050, EzyFit connector with 1.3mm OD x 0.50mm ID x 700mm long sample tubing.

The new Helix CT spray chamber will be officially released at Pittcon 2018 in Orlando FL, February 27th to March 1st. After March 2018, Glass Expansion will equip all of its glass, PFA and PTFE spray chambers with the Helix CT interface as standard. To be the first to request a Helix CT spray chamber for your ICP, please complete the Contact Form on the right and we will provide you with a quote.

MicroMist EzyFit nebulizers with sample uptake 0.05 - 0.1mL/min are fitted with:
1 x EZT-025, EzyFit connector with 1.3mm OD x 0.25mm ID x 700mm long sample tubing.

All MicroMist U-Series nebulizers are supplied with the EzyLok argon connector.

Eg. ARG-1-UM02
MicroMist U-Series nebulizer with UniFit Sample
Connector and EzyLok Argon Connector

MicroMist EzyFit nebulizers with an 'E' at the end of the part number are supplied with EzyLok argon connector.

Eg. AR35-1-FM02LE
MicroMist Nebulizer with EzyFit Sample
Connector and EzyLok Argon Connector

Choose a MicroMist to suit your ICP