Niagara Plus CM

Halbierte Betriebskosten

Weniger Umweltbelastung

Doppelter Probendurchsatz

Download: Niagara Plus-Produktblatt (PDF)

Download: Niagara Plus-Whitepaper (PDF)

Download Application Spotlight

Improve the Productivity and Precision of your ICP Laboratory

Unser neues Niagara Plus mit Probeneinspritzungs-Technologie halbiert Ihre Betriebskosten und die Analysedauer und schont die Umwelt:

• Niedrigerer Argon-Verbrauch
• Spart Kosten für Verschleißteile wie Fackeln, Konen, RF-Spulen, Pumpenschläuche, Säuren, Standardsubstanzen und Chemikalien
• Niedrigerer Energieverbrauch
• Geringere Belastung des RF-Systems und weniger Wartungskosten
• Weniger Ausfallzeiten zur Kohleentfernung von Fackeln bei der Analyse organischer Proben
• Weniger Chemieabfälle

Zusätzlich zu den Kosten- und Umweltvorteilen bietet das Niagara Plus deutliche Verbesserungen der Analyseleistung:

• Doppelter Probendurchsatz bei typischen Analysen
• Halbe Probenmenge
• Automatische Zugabe der internen Standardsubstanzen für einfachere Probenvorbereitung
• Reaktionsträger Probenkanal verringert Verschleppen - kein Kontakt der Probe mit den peristaltischen Pumpenschläuchen
• Konstante Zufuhr der Lösung zum Plasma erhöht dessen Stabilität und verkürzt die Stabilisierungszeit
• Kompakte Ausführung passt auf fast alle ICP-MS- und ICP-OES-Modelle

Niagara II module with positive displacement pump and control module

The Niagara Plus provides enhanced performance through unique design features:

• Bubble Injector: The Niagara Plus automatically injects several air bubbles at the end of the sample plug while filling the sample loop. These air bubbles prevent boundary diffusion and do not allow the sample to mix with the carrier solution. This allows a smaller volume of sample to be used and further reduces the analysis time. Because the bubbles are injected at a programmed time they are never introduced into your nebulizer, thus avoiding any plasma disturbances.
• Time In Sample (TIS) option: This feature allows you to program the time the autosampler probe sits in the sample tube, instead of waiting until the loop is filled. This prevents the sample in the uptake lines from being wasted, further reducing the amount of sample consumed. Combining the Bubble injector and TIS the Niagara Plus can save up to 55% of the sample compared to a system without these features.
• Built-in internal standard tee: This low volume removable mixing tee allows the operator to tee in diluent or internal standard without significantly lengthening either the equilibration time or washout time. If you select not to tee in an internal standard or diluent, the tee can simply be removed from the valve.
• Programmable Uptake Pump: The method wizard calculates the optimum pump speed for the length of the uptake tubing, including the autosampler probe and sample loop.

New Control Module

The new Niagara Plus CM is controlled by a dedicated control module rather than the instrument PC. The benefits are:

• Faster communication, resulting in even higher sample throughput.
• The option of running unattended without any connection to the instrument PC once the method has been loaded.
• Simplified installation.

Part Number	Description
KT-1118	Niagara Plus CM (requires autosampler probe)
KT-1127	Niagara Plus CM for HF with Uptake Syringe

Brackets

A mounting bracket is required for most ICP models. Choose from the following:

Part Number	ICP Model
70-803-0979	Agilent ®7700/7900/8800
70-803-0906	Bruker Aurora 800
70-803-1141 21-809-2768	PerkinElmer ® Optima 2/4/5/7/8000 DV
21-809-4143	Spectro™ Arcos/SpectroBlue™ with cyclonic spray chamber
No bracket required	Agilent ® Vista/700-ES Radial
No bracket required	Agilent ® 4100 MP-AES
No bracket required	Spectro™ MS
70-803-1141	All other models

The Niagara Plus requires a 1.0mm ID autosampler probe for correct operation. Select one of the following probes:

Part Number	Description
70-803-0793	Teflon Encapsulated Carbon Fibre Probe 1.0mm ID (suitable for Cetac ASX-520)
70-803-0816	Teflon Encapsulated Carbon Fibre Probe 1.0mm ID (suitable for PerkinElmer ® S-10 or AS-93+)
70-803-0853	Teflon Encapsulated Carbon Fibre Probe 1.0mm ID (suitable for Agilent ® SPS-3/SPS-4 or AIM-3600)
60-703-0533	Teflon Encapsulated Carbon Fibre Probe 1.0mm ID (suitable for Agilent ® I-AS)

Part Number 70-803-1298, SPS-4 Cable and Software kit, is also needed to operate the Niagara Plus CM with the Agilent ® SPS-4 autosampler

If your autosampler is not listed here, please contact Glass Expansion at enquiries@geicp.com.

Lieferumfang des Niagara Plus-Sets:

• Niagara II-Modul
• Kolbenpumpe
• Control Module
• Alle benötigten Kabel und Schläuche
• USB memory stick with operating software and instructions

Typische Probenanalysezeit: 1 Stunde.

Typische Zykluszeit für Niagara Plus gegenüber Standard-ICP-System.

Schritt 1 - Probenschleife befüllen
Die Kolbenpumpe füllt rasch die Probenschleife auf. Gleichzeitig werden dem Zerstäuber die Spül- und Standardlösungen zugeführt. Sie spülen Zerstäuber und Sprühkammer aus und gewährleisten die Plasmastabilität.

Schritt 2 - Probe ansaugen
Das Niagara-Ventil schaltet um, so dass die Spüllösung die Probe in den Zerstäuber schiebt. Die interne Standardlösung wird im Inneren des Ventils mit der Probe vermischt. Gleichzeitig spült die Kolbenpumpe die Autosampler-Sonde und die Probenzuführungsschläuche durch. Dabei kommt die Probe zu keinem Zeitpunkt mit den peristaltishen Pumpenschläuchen in Kontakt.

Spare Parts and Consumables for Niagara Plus

Spares for Niagara Plus
70-803-1113	Niagara CM Module without Valve or Accessories
70-803-0814	Replacement 7-port Valve for Niagara Plus or Assist
70-803-0722	Replacement 12-port Valve for Niagara Plus or Assist
KT-1128	Uptake Pump CM
70-803-1114	Control Module Kit
70-803-1171	Control Module without Accessories
70-803-1172	CM Power Supply
70-803-1173	Serial Extension Cable
70-803-1174	CM USB Control Cable
2518	Ratchet Connector and Seal - Collared
70-803-0789	Direct Nebulizer Fitting for Niagara
21-809-3352	Niagara Mount for IsoMist
70-803-0821	UniFit Nebulizer connector for Niagara 50mm
70-803-0922	EzyFit Nebulizer connector for Niagara 50mm
70-803-0925	FlaredFitNebulizer connector for Niagara 50mm
70-803-0822	Nebulizer connector for Niagara 120mm
70-803-0970	Twin Ratchet Nebulizer connector for Niagara
70-803-1078	Niagara Sample Loop 0.25mL
70-803-1056	Niagara Sample Loop 0.5mL
70-803-1079	Niagara Sample Loop 1.0mL
70-803-0929	Niagara Sample Loop 1.5mL
70-803-0977	Niagara Sample Loop 2.0mL
70-803-0978	Niagara Sample Loop 2.5mL
70-803-1081	Niagara Sample Loop 4.0mL
70-803-1143	Control Module Upgrade Kit
70-803-1186	Acetal Bearing
70-803-1187	Dual Vee Guide Wheel Ecentric
70-803-1188	Dual Vee Guide Wheel Concentric
50-100-1811	Swage Tool for Ratchet Connector

Spares for 7 Port Valve 70-803-0814
70-803-1176	Niagara Plus CM Valve Tubing Kit
70-803-0949	Niagara Plus Valve Tubing Kit, 7 port valve
70-803-0815	Mount Plate, Niagara 7 Port Valve
70-803-0818	Mixer, Niagara 7 Port Valve
70-803-0819	Thrust Washer, Niagara 7 Port Valve
70-803-0907	Body, Niagara 7 Port Valve
70-803-0812	Rotor, Niagara 7 Port Valve
70-803-0813	Rotor Sleeve, Niagara 7 Port Valve
70-803-0820	Mixer Plug, Niagara 7 Port Valve
70-803-0948	Screw for Niagara Valve, M3x10 (pack of 4)
50-100-1754	Rotor Sleeve Alignment and Extraction Tool, Niagara 7 Port Valve
70-803-1126	Stainless Steel Rotor, Niagara 7 Port Valve

Spares for 12 Port Valve 70-803-0722
70-803-0836	Niagara Plus Valve Tubing Kit, 12 port valve
70-803-0690	Mount Plate, Niagara 12 Port Valve (before March 2011)
70-803-0923	Mount Plate, Niagara 12 Port Valve (after March 2011)
70-803-0725	Mixing Chamber, Niagara 12 Port Valve
70-803-0734	Thrust Washer, Niagara 12 Port Valve
70-803-0781	Body, Niagara 12 Port Valve
70-803-0721	Rotor, Niagara 12 Port Valve
70-803-0720	Rotor Sleeve, Niagara 12 Port Valve
70-803-1042	Ratchet Plug
70-803-0948	Screw for Niagara Valve, M3x10 (pack of 4)
50-100-1677	Rotor Sleeve Alignment and Extraction Tool, Niagara 12 Port Valve

Spares for Positive Displacement Pump KT-1128
70-803-1163	Uptake Pump CM without Accessories
70-803-1170	Uptake Pump CM without Accessories with Serial Adaptor
70-803-1177	Pump Tubing Kit for Niagara Plus CM
70-803-0837	Pump Tubing Kit for Niagara Plus
70-803-0867	Replacement FMI Pump Head
70-803-1038	Replacement FMI Pump Head with Motor and Bracket
70-803-0868	Wiper Seals for FMI Pump (PKT 3)
70-803-0869	Installation Tool for FMI Pump Seal
70-803-0945	Gland Nut for FMI Pump
70-803-0946	Teflon Gland Washer for FMI Pump
70-803-0972	Bubble Injector Tee Piece
70-803-0990	Bubble Injector One-Way Valve
70-803-1184	Bubble Injector Valve (inside pump module)
70-803-0966	1/4-28 Male to 1/8" Barb Fitting (PKT 2)

Das sagen unsere Kunden

The Niagara has been running every day, without any problems at all. It’s been a game changer.

Food manufacturer - USA

We use Glass Expansion's Niagara Plus - it has doubled our throughput as well as significantly decreased contact of analyte with tubing etc. resulting in way less carryover issues esp with Boron and Mercury.

Environmental Testing Laboratory - USA

A couple of years ago we purchased a Niagara Plus from you and it is a marvel ! ...... more than doubling the sample analysis per day.

Soil laboratory - New Zealand

I can say without hesitation than the Niagara Plus valving system is the best one we have tested. It is the most reliable, and requires the least amount of maintenence....very important points for us.

Contract laboratory - Canada

The Niagara Plus is amazing and I am zipping through my work.

Environmental laboratory - Canada

We liked the Niagara so much we would like to purchase a second.

Environmental laboratory - USA

(In reference to the Niagara Plus) Everything is going great! I have run several hundred soda samples with no clogs or problems. So far, it is a huge time-saver and reduces a lot of frustration.

Specialty chemicals manufacturer - USA

(In reference to the Niagara Plus) We have reduced the time from 9 mins to 5 mins which is HUGE! Thank you for such great customer service!

Environmental laboratory - USA

The Niagara setup has been working exceptionally on the Agilent ®.

Contract laboratory - Canada

We are very happy with the Niagara Plus. It has greatly increased the productivity of our instruments.

Geochemistry laboratory - Australia

Running a ICP-MS without a Niagara Plus, is like running a ICP-MS without a torch.

Environmental laboratory - USA

We have all instruments using the Niagara Plus and the IsoMist and have increased efficiencies by up to 40% and over-all quality has also shown improvements, so we are very happy with them.

Minerals laboratory - Australia

With Niagara Plus we have found a marked improvement in carry over, productivity, gas and internal standard usage without the loss of sensitivity ... Argon saving would be around 40-50% as sample time has been halved ... Our most noted improvements are Mo from a 0.5 mg/L (standard) carryover could be greater than 20 ug/L, now undetectable less than 4 ug/L, Fe 10 mg/L (standard) used to carry over greater than 5 ug/L, now undetectable less than 2 ug/L.

University environmental laboratory - Australia

Home | Wir über uns | Produkte | Einkaufswagen | Händler | Updates | Produktpflege | Artikel suchen | Kontakt

Copyright © Glass Expansion 2002-2018